So You Want To Record Authentic-Sounding Guitar In Your DAW
- How To Connect Irig To Garageband Ipad 4
- Irig Compatible Apps
- How To Connect Irig To Garageband Ipad Free
In this article, I’ll show you exactly how to plug your guitar into GarageBand. The way that I find works best is the most convenient and sounds pretty good as well while minimizing latency and other problems.
In order to show off like a real pro you can also use turn-table effects like backspin, brake, flippin double, overloop, etc. Skin virtual dj 5. 0 download. But all these features mean nothing for a newcomer, therefore the software offers an auto mix solution which makes all the work for you in transitions.
How to Plug Your Guitar Into GarageBand
There are a few different ways of doing this, and some are significantly better than others. I’m just going to show you the way that I do it.
Nov 29, 2011 6 easy ways to connect your guitar to your iPhone, iPad or iPod touch Many of us have iPhones, some of us have iPads, and it can’t have escaped your attention that there are many apps available for iOS devices aimed at guitarists. Aug 11, 2015 iRig allows guitar and bass players to plug into their Mac, iPhone/iPad or iPod Touch and use their mobile device to play, practice and record with apps like IK's AmpliTube, Apple’s GarageBand.
I have a couple of pieces of necessary gear:
- Obviously, your guitar.
- A Firewire to USB Cable
- an Audio Interface (I use the Focusrite Saffire 6USB. The Scarlett 2i2 is good too.)
- A USB-C to USB cable (The only reason this adapter is necessary is I’m using the latest edition of the MacBook Pro. The older generation MacBook Pro doesn’t need this adapter).
- Regular Guitar Cable.
If you’re new to music production, understand that a lot of this equipment will come in handy for years to come.
If you’re serious about recording and producing, much of this equipment and more are a necessity, so just grab some of it off Amazon and be done with it.
Without further ado,
The actual steps:
1) Connect your Firewire cable to your MacBook Pro. In most cases, this cable will come with your purchase of an audio interface, or a MIDI keyboard. However, if you don’t have one for whatever reason, I’m sure you can pick one up from Amazon for cheap.
2) Usually, the port for the firewire cable is on the back of the Audio Interface. Plug the other part of the firewire cable into the back of the Audio Interface.
In my case, the Firewire to USB has to go into the USB-C adapter that I mentioned earlier.
3) Now, assuming you have the Focusrite Saffire 6USB, it should be powered by your computer. You don’t have to plug it in or anything like that, so all of its lights will turn on which you can see on the front of the unit.
4) Open GarageBand.
5) Click “Open Project,” or one of your old existing files. It doesn’t matter.
6) Once it brings up the “Choose A Track Type Page,” Click on where it says: “Built-in Input.”
7) This should be all that’s needed for this part of the process. However, assuming this is the first time that you’ve ever done this, it wouldn’t be a bad idea to click on where it says, “Built-in Output.”
8) That should bring up your “Output” and “Input” Devices under the Audio-MIDI region preferences.
9) Make sure you’ve selected “Built-in Output,” if you’re using your computer as your speaker, or the speakers that are hooked up to your laptop.
10) Select your Audio Interface for the “Input Device.”
11) Now, once you’re back at the “Choose A Track Type Page,” then click on one of the two subheadings below, either the “Guitar option,” or the “Microphone option.” This should bring up your MIDI Region and all of your controls.
May 19, 2012 The list of download failures grows. Anyone get this figured out. Me Panic too!, like John! I have attempted to download the GarageBand app directly from iTunes store from a PC intallation of iTunes software, wireless from the iPhone 4 & from the iPad2. Never had this type of issue before with any app download. Garageband wont download ipad. Jul 23, 2018 If GarageBand isn't working on your iPhone, iPad, or iPod touch. Get help if GarageBand won't open, or if your project won't open or play back. Try again after each step. In the App Store, tap Updates. Find GarageBand in the list. If you see Update next to. Dec 11, 2017 If GarageBand won't open after updating your iPhone, iPad, or iPod touch to iOS 11, turn off iCloud for GarageBand on your device. Tap into a wide range of instruments from around the world. And now with the Sound Library, you can choose and download more free instrument and loop packs when new sounds are released, to help you easily craft songs in your favorite styles — all right from your iPhone, iPad, or iPod touch. Download GarageBand for iOS.
12) In the “Smart Controls Area,” make sure that you’ve selected your audio-interface where it says, “Input.”
13) Now, plug your guitar into the front of your Audio Interface.
14) Click on the “Monitoring Button,” which looks like an upside down Wi-Fi symbol. This part is important, otherwise, you won’t be able to hear what you’re even playing.
15) You can now select whatever kind of amp you want, whether it’s a “clean guitar,” “crunch guitar,” “acoustic guitar,” “distorted guitar,” “experimental guitar,” “clean bass,” “crunch bass,” and “experimental bass.”
16) You want to hit the “Monitoring” button beside your track-header as well. I’ve highlighted the upside down Wi-Fi-looking symbol with a black circle. It’ll turn orange once it’s been selected.
Under each heading, there are quite a few options that all sound pretty good, especially after you tweak them to your preferences.
And it’s pretty much as simple as that.
There are some problems that you can run into when doing all of this for the very first time. For that reason, I’ll explain some of the problems that I’ve had when I first started out.
Common Problems and Annoyances As A Beginner
1) Make sure that the gain on your Audio-Interface isn’t turned up too much, otherwise, you’re going to be feeding GarageBand too hot of a signal, which will make it sound distorted and bad.
2) Make sure the “Pad,” and “Inst,” buttons are turned off on your audio interface, assuming you own a Focusrite Saffire 6USB. I imagine there are similar controls on other audio interface models.
I find that these buttons make the signal too powerful as well, and thus, create distortion.
3) Latency. I’ve never actually had latency problems when using an Audio Interface, but some people do have this problem. I have an entire article on Latency which you can read more about here.
Essentially, if you’re having latency issues, there could be a number of different causes, however, most of them will be a result of your set-up and incorrect settings for your gear.
For instance, you want to make sure that – if you’re running more than one track – you have the monitoring button turned on for only one of them, rather than every single track.
Other Ways Of Recording Your Guitar In GarageBand
1) You can also use your MacBook’s microphone. This is for very rough demos, obviously, because this way of doing it is going to make a very low-quality recording. However, if you’re desperate, and want to record something, this method will work.
- To do this, you just open a new “Audio” track in your workspace.
- And then click on the “Record” button.
- Start playing the guitar with your amplifier close to it, and that should be enough for a very rough demo.
2) You can also purchase a Guitar to USB cable and hook your guitar directly up to GarageBand. This is an inferior way of recording guitar tracks as well, but it works if you’re running on a string budget.
(This is what a guitar-jack to USB looks like. I don’t own one so I couldn’t take a picture. I had to piece these two images together, but this is what it looks like).
GarageBand will immediately recognize this as an input, so you don’t have to worry about there being compatibility issues.
However, like the method above, you’ll likely run into latency.
3) Use a small portable audio interface if you plan on only running one instrument through your DAW. This is pretty much the same as the main method which I described in detail above.
The only difference is that you’ll be using a much smaller, and likely, limited audio interface. The good thing about this is that it’s relatively inexpensive. Small interfaces are becoming exceedingly popular, like the iRig for example.
I haven’t picked one of these up yet, but once I start traveling around Europe, I imagine I’ll eventually purchase one. I’ll make sure to write a review on it once I do.
Update: You have to use the iRig HD if you want it to work with a PC computer or Mac. The iRig 2 is only good for mobile.
4) Another popular way would be to mic your guitar amplifier up to your audio interface and then through GarageBand.
This is a decent option, but I prefer just to run my guitar directly through GarageBand, rather than doing this. Amplifiers are too big and cumbersome, and I would much rather limit the amount of gear I own.
Before playing your guitar in GarageBand, know that there’s an actually fairly useful tuning mechanism set up in the DAW. It’s not as good as a good old fashioned Korg tuner, but it still works pretty well. I usually use it if I’m too lazy to go over and grab my tuner.
How To Tune Your Guitar Using GarageBand
1) Your guitar is plugged into your audio interface in the computer, so it’s as simple as clicking on the tuning fork beside the center of the DAW where it shows the time signature, tempo, and key signature.
2) When you click on the tuning fork icon, it’ll bring up the meter where you can tune your guitar.
Other Features
One of the great things about using a DAW for your guitar is all of the great VST plug-ins that you can use for your guitar.
For example, you can download amplifier simulators and cabs for your set up, and while it may not sound good as the original which the plug-ins are modeled after, they still sound good enough to use, and they’re good enough for the vast majority of people who aren’t tone-purists.
I’ll show you how to download plug-ins into your DAW in a later article.
That’s all for now. If this helped you out, do me a favor and share it on social media.
YouTube Video Tutorial
In order to take advantage of the great guitar-processing apps available for the iPad and iPhone, you need a way to get the signal from your guitar or bass into your iOS device. For that, you’ll need a dedicated guitar interface or a more fully featured audio interface that can handle not only guitar and bass connections but also microphones and sometimes even MIDI as well.
Two different types of guitar/bass interfaces are available on the market:
Digital interfaces, which connect through the dock port on your device
Analog interfaces, which connect through the headphone jack on your device
Going digital
Initially you could only find analog guitar interfaces for iOS, but the last couple of years have brought forth plenty of digital models. These offer better sound quality than the analog ones, because they convert your instrument signal into digital audio and keep it in the digital domain as it goes into your device. Conversely, analog interfaces bring the signal in through the analog headphone jack, and it doesn’t get digitized until it gets into your device.
How To Connect Irig To Garageband Ipad 4
These digital interfaces offer 24-bit audio resolution, which is the same resolution used in most professional computer recording software. The result is that your guitar or bass will sound the same going into an app as it does coming out of your guitar, and no noise will be added.
Some of the best-known interfaces of this type include:
Apogee Jam
Apogee Jam 96K
Griffin Guitar Connect Pro
IK Multimedia iRig HD
Line 6 Mobile In
Peavey AmpKit Link HD
Positive Grid’s JamUP Plug HD
Sonoma Wireworks GuitarJack Model 2
Irig Compatible Apps
The only disadvantage to digital interfaces is their cost, which is typically in the $90 to $120 range, depending on the product.
Connecting one of these interfaces to your device is easy: Just plug it in to the dock connector, plug your guitar or bass into its 1/4” input jack, and you’re ready to rock.
Note that some interfaces feature the older-style 30-pin connectors, which means if you have one of the newer generation of Lightning-equipped iOS devices, you’ll need one of Apple’s Lightning-to-30-pin adapters in order to connect it to your device. This adapter will set you back about $30, so figure that into your budget, or choose an interface such as IK Multimedia’s iRig HD, or Griffin’s Guitar Connect Pro, which supports both formats out of the box.
If you plan on using both MIDI and audio in your live rig, make sure you buy an interface that supports both. You only have one data connector, after all— don’t make your devices fight for space!
The analog alternative
Analog instrument interfaces offer an inexpensive alternative to the digital products. Although analog audio isn’t as clean and pristine as digital audio, for a lot of applications, the difference won’t be particularly noticeable. Analog guitar interfaces tend to sell in the $20 range, for the most part, so if you’re willing to live with a signal that might be slightly noisy at times, you can save quite a bit.
These interfaces connect through your device’s headphone jack, using a kind of connector called TRRS, which is a special type of mini-plug that allows audio to travel both in and out of your iPad, iPhone, or iPod touch. This is important because not only do you want your guitar signal to go into your iOS device, you want to be able to hear it and any background tracks or other music you’re playing with it at the same time.
If you’re wondering where you’ll be able to plug your headphones into, since the interface is connected to your headphone jack, there’s a simple answer. All of these analog interfaces have their own built-in headphone output jack, so you can listen to the audio coming out of your device at the same time as your guitar’s signal goes in through the iOS device’s headphone jack.
Because they’re 30-pin devices (a format that Apple has replaced), analog interfaces may not remain on the market all that much longer. But currently, these three were still available, all at reduced prices (under $30):
How To Connect Irig To Garageband Ipad Free
IK Multimedia iRig
Positive Grid JamUp Plug
Griffin Guitar Connect Pro